Does A Dirty Filter Slow A Pool Robot
Kreepy not working? Here are some things to check.
Pool Tips | Comments are Closed | 25 Oct, 2017 | 0
Kreepy non working when you get dwelling house from work? By Kreepy, we mean any automatic pool cleaner or APC.
Some call it a Baracuda or a Zodiac, simply Kreepy is the generic name virtually use for an automatic pool cleaner.
Interestingly plenty, we use 'Kreepy' mostly in S Africa because the first-ever automated pool cleaner invented was named Kreepy Krauly. A Belgian engineer living in South Africa invented it.
There are iii chief reasons a Kreepy stops working, other than the usual scenario of a leaf, stone or berry getting stuck in the Kreepy'south 'throat'.
-
The filter sand gets chock-full.
-
There is a suction, air leak or pump-related problem.
-
The Kreepy itself (or other swimming pool apparatus) is faulty.
The filter sand gets clogged
The near common cause for a Kreepy to stop working is chock-full filter sand. This is piece of cake to diagnose because whenever you backwash the pool filter, you lot'll discover that the Kreepy works like a flop for x minutes. So it gets sluggish and slows downwards or stops again.
Pump Flow-Charge per unit
Your pump pumps around 100 000 litres of water through your sand filter every twenty-four hour period. When you backwash the filter, only a couple of hundred litres of h2o removes the clay from the sand. It'due south never going to clean your sand back to its original status.
When the filter is set back to normal filtration later on a backwash, the clay that wasn't loosened sinks deeper into the filter sand. This is why we need to modify our filter sand from time to time.
We recommend irresolute this every one to five years, depending on the bather load of the pool and other (soil and foliage) conditions effectually the puddle.
How do I examination if the filter sand is clogged?
To make sure that clogged sand is the trouble, switch the pump off and turn the multiport valve to the 'bypass' or 'broadcast' position and and so try running your Kreepy. If the cleaner flies around the pool like an ex on a broomstick for an hour without getting sluggish, then you've hit the nail on the caput – information technology's the sand that's the problem.
If you lot're non certain how to change the sand in your filter, rather get a pool company to exercise it – and brand certain it'south a pool company registered with the National Spa and Pool Institute of South Africa.
There are some risks to doing it yourself, such equally the fact that the bacteria in a sand filter tin can brand you very sick. As well, you lot could inadvertently damage some of the plastic fittings inside the filter tank, especially if they are brittle.
Here's a related article with some advice on an alternative to changing the filter sand: Kreepy not working? Swimming pool water green and cloudy? You could have chock-full filter sand.
Check in again for the second part of this pond pool blog, where nosotros'll talk nigh the possibility of a suction leak in your pool pipe.
There is a suction, air leak or pump-related problem
The pipe betwixt the weir (skimmer box) and the pump must be airtight in guild for the Kreepy to work properly. If there is a interruption in the pipe, the pool return jet will blow bubbles back into the pool.
The leak doesn't necessarily have to be underground. We usually inquire our customers if the pool loses h2o when it'due south switched off because this can bespeak that the leak is underground.
The simplest of things could also be causing a suction leak, so bank check the post-obit:
- Cheque that the pump lid O-band is in place.
- Check that the pump chapeau is fitted on properly and is not cross-threaded. (Practice not overtighten the pump hat.)
- Check the hand nut union or pump plumbing fixtures to ensure it is secured with enough thread tape and silicone.
- Check the shaft seal underneath the pump isn't leaking.
Related article: Pump loses force per unit area
The Kreepy itself (or other swimming pool apparatus) is faulty
Y'all may find the if you've checked all the possible causes above and everything appears to be in order, the Kreepy itself could be faulty.
Check to meet if in that location are whatever obstructions in the 'throat' of the Kreepy because sometimes a stone or leaves could get jammed in it.
There may be a worm or malfunctioning function on the Kreepy. A puddle shop can usually help diagnose if this is the case.
A handy style of checking if the Kreepy is or isn't the problem is by borrowing your neighbour'south or a friend'south Kreepy to test in your pool. If the substituted Kreepy works, and so the chances are strong that your Kreepy is the problem.
Does A Dirty Filter Slow A Pool Robot,
Source: https://blupool.co.za/kreepy-not-working/
Posted by: suzukiwhourpel2001.blogspot.com
0 Response to "Does A Dirty Filter Slow A Pool Robot"
Post a Comment